Environmental guidance for your business in Northern Ireland & Scotland

Bunds for fuel and chemical storage

Bunded areas to comply with oil storage regulations and for safe chemical storage

A bund is a structure that storage tanks or barrels can be stored inside. It is designed to prevent oil, fuel or chemicals from escaping into the environment if the storage tank or barrels leak or burst.

What you must do

Bunds or secondary containment systems must meet certain requirements, as specified in General Binding Rule (GBR) 28 in Scotland or the Oil Storage Regulations in Northern Ireland. The requirements include:

Location

Identify a location on site where you can set up a storage compound for oil, fuel and chemicals. Ideally, the compound should remain in the same place for the duration of your works. It should be as far away as possible from surface waters, groundwater and surface water drains.

Plan how the storage compound will be removed at the end of the contract.

Identify the types of waste that will be present and where you can dispose of them.

Duty of care - your waste responsibilities

Hazardous / special waste

Capacity

A bund should be able to contain 110% of the volume of the largest container stored within it.

For drum storage, the bund capacity of 25% of the maximum volume of material stored is sufficient.

A notice close to the bund should display the maximum number of barrels and containers that can be stored at any one time.

Maintenance

Your environmental regulator can serve you with an 'anti pollution works notice if your site causes, or is at risk of causing water pollution. This notice will require you to clean up any pollution and to take action to prevent any further pollution.

The volume of rainwater within any bunded area should never exceed 5% of the total volume of the bund. Accumulated rainwater and other liquid in the base of the bund will reduce its capacity and may need to be disposed of as hazardous/special waste.

Hazardous / special waste

If possible, put a roof over the bund and cover the sides that receive the most severe weather. By reducing the amount of contaminated rainwater in the bund that you must dispose of, you could save money.

Nominate someone to check regularly that the bund is intact and not leaking.

Evidence of leaks can include discolouration of unrendered block or concrete bund walls or an oily sheen on any water standing on the ground close to the bund. If the bund is leaking, you should take immediate action to prevent land contamination and pollution of surface waters and groundwater. Your environmental regulator will be able to advise you on what action you should take.

Contact your environmental regulator

Where appropriate, you could paint concrete bunds or refuelling areas with epoxy type paint to prevent fuel and oil drips from soaking in.

When you break out the concrete at the end of the project, it may not need to be disposed of as hazardous/special waste as it is less likely to contain soaked-in oil or diesel. Look at the broken out concrete to see if it is discoloured, smell it to see if it smells of oil, diesel or petrol. If you are unsure, have samples laboratory tested. You should also make sure that your waste haulage contractor agrees with your classification of the material.

Associated equipment

All hoses, valves, trigger guns, funnels and other associated equipment should be kept within the bunded area to prevent land around the bund from being contaminated.

Any trigger guns present should be fitted with an automatic cut off. This will help prevent spills of fuel onto the ground from equipment or containers being overfilled.

Deliveries

Supervise deliveries of raw materials or fuels to your site and clearly label tanks with their contents and storage capacity; this will reduce the risk of overfill and spillage.

Records

Keeping the following records may be useful to you:

  • when the bund was last inspected
  • the rainwater level – the more rainwater present within the bund, the lower its capacity for containing spills
  • how frequently rainwater is removed – this overlaps with your duty of care for the disposal of contaminated rainwater
  • any maintenance work undertaken on the bund.

Further information

GPP 2 Above ground oil storage tanks (Adobe PDF - 276KB)

GPP 21 Pollution incident response planning (Adobe PDF – 318KB)

SEE ALSO: Oil storage, Chemical storage

 

Whats new on NetRegs

  • Waste – Duty of Care Roles and Responsibilities

    The Northern Ireland Environment Agency has published a short guide to the duty of care responsibilities including advice and information for waste producers, carriers and those accepting, storing and treating waste.

    https://www.daera-ni.gov.uk/publications/waste-duty-care-responsibilities

  • NetRegs:- FREE, ANONYMOUS, PLAIN ENGLISH GUIDANCE FOR BUSINESSES

  • EIA (Agriculture) Regulations for Northern Ireland

    Any person intending to alter the use or management of areas of uncultivated or semi-natural land must obtain prior approval from the Department of Agriculture, Environment and Rural Affairs (DAERA).

    Read more on the DAERA website

  • Guidance from your environmental regulator

    Regulator logos

  • 9 NEW GPPs (Guidance for Pollution Prevention) available now

    The NetRegs team at SEPA, in partnership with The Northern Ireland Environment Agency, Natural Resources Wales and a number of industry bodies have produced 9 new GPPs to replace out of date PPGs. More are coming! Check the available topics

NetRegs on NetRegs on youTube

View our latest videos & subscribe to our channel.

NetRegs Update Newsletter

Free monthly email newsletter with environmental updates for Northern Ireland and Scotland

Sign up for free today!

Permits

NIEA - Apply online

SEPA - Application forms